Trying to overcome suburban noise

The other week, a friend of mine Rob VK2GOM shared a photo of a 1:1 current balun he had built to try and reduce some local noise issues he had at his home. His device had improved his experience. He chose 17 turns and the FT240-43 core based on info from this website Have a read of that page for a better understanding.

choke_impedances

I have a fair bit of suburban noise living in a small block in middle suburbia, my antenna runs along a fence line adjacent to two houses, plus this house is full of gadgets. I also sometimes get some RF in the shack, just because of the less than ideal setup and operation I have. So, for a couple of dollars and a small bit of time, i decided to build up what Rob had made and see if it helped.

The device uses 5 items. (you may have may in your bits box)

So over the last couple of weeks, when time permitted I had made it up.

IMG_5844IMG_5845  IMG_5846IMG_5848

Take the coax (2-3m, i didn’t actually measure how much I used) and cable tie a short coax tail at the base of the toroid to start the winding. The configuration I have is 8 turns per side, with a cross over, 17 turns all up. When you get to the top of side one, cable tie this half to keep it tight and even. Cross over and repeat on the other side. Once you get back to the top, cut your top temporary cable tie holder and replace with a new one on the end winding.

Then drill up the Box, fit the SO239’s, solder it up and you are done.

IMG_5893IMG_5908  IMG_5913IMG_5914

 Its made a small improvement on local noise. Doesn’t appear to have any negative effects It was easy to make and now is inline with my radio.

2 thoughts on “Trying to overcome suburban noise

  1. Hi Andrew, I have constructed an OCF dipole for 40m through to 10m and yesterday I started construction on a common mode current choke. I have taken the liberty of replicating your version of the choke. Thanks for your post.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.